Profile aluminum square tube with characteristics of aluminum ventilation extrusion molding, product hardness, straightness is far more than other products, the installation structure for the use of the upper main bone, screws and specially made components and profile hammer connection, windproof, suitable for outdoor decoration (keel spacing can be arbitrarily adjusted). The special aluminum square tube can be bent into an arc. The appearance of the curved aluminum square tube provides a broader space for designers to create more unique and beautiful works. The installation of different aluminum square tubetube is can choose different heights and spacing, can be a high one low, a sparse one dense, coupled with reasonable color collocation, so that the design is kallible, can design a different decorative effect. At the same time, because the aluminum square is permeable, lamps, air conditioning system and fire fighting equipment can be placed in the ceiling to achieve the perfect visual effect of the overall consistency. The aluminum square tube is simple to install and convenient to maintain. Because each aluminum square tube is separate, it can be installed and disassembled at will, without special tools, it is convenient to maintain and maintain.
In recent years, the curved aluminum ceiling has become more and more hot, the number of consumers and consumer groups are also more and more. Curved aluminum square with its bright decorative effect, strong visual impact, stunning decorative effect has obtained the favor of various industries, now, in a variety of occasions can see the shock effect of arc shape aluminum square ceiling, wave wall, wave ceiling, etc., are from the effect of curved aluminum square. Such magical adornment material, how to be processed come out? aluminum square tube manufacturers for you to introduce the shape of its processing procedures.
1, CNC engraving cutting material
According to design drawing after refining, the data input to the data center, numerical control cutting by CNC engraving machines, curved aluminum rectangular tube material consists of three blocks, the edge high * 2, bottom width three pieces of material, because the bottom width of the material is regular, so using the conventional cutting machine cutting, CNC engraving cutting, is used for high arc of two pieces of material processing.
2, ingredients folding edge
After the material is prepared, it is necessary to carry out the batching. The batching is to confirm and arrange the quantity, and then the bending machine is used to carry out the flange processing. The flange at the opening is generally about 2cm, and the actual flange processing is carried out according to the needs of the lifting system.
3, reinforcement process
According to the size of the curved effect, the reinforcement is the most commonly used reinforcement material. The large thickness but small depth need not be reinforced, while the small thickness but large depth usually need to be reinforced to ensure the effect of the board.
4, Spot welding forming and fixing
The purpose of spot welding molding is to combine the edge material and the plate surface with forming and fixing. First of all, the bottom material and the edge material need to be spot welded and fixed. In the process of spot welding, it is necessary to always correspond to the size of the plate and the flatness of the plate surface, to ensure that it does not affect the overall modeling.
5, all welding process to ensure stability
Why is full welding still needed? This is because the curved aluminum square is relatively thick. If it relies on spot welding alone, the panel is easy to crack due to the influence of gravity and other factors in the use process, which affects the decorative effect and increases the maintenance cost. Therefore, it is necessary to carry out full welding processing on the welding wiring to ensure its stability and flatness.
6. Polishing
After the completion of full welding, it is also necessary to confirm the size and the adjustment of flatness. After these are confirmed, it is very important to polish and polish the welding line. It is necessary to polish and polish it smooth enough, so that the sprayed product will be beautiful, so the process of polishing and polishing requires excellence.
7, coating processing
Coating processing according to the color of the design scheme, curved aluminum square tube can choose electrostatic powder spraying, paint spraying, fluorocarbon spraying, thermal transfer wood grain processing, the choice of technology according to the design style and the requirements of the use of the environment.
8, the final packaging
Packaging is also an important step, good packaging can be a good protection of the finished product, so generally stick white film and then wrap bubble glue, because of the curved aluminum square irregular shape characteristics and weight than other finished products to be larger, so it is necessary to nail wooden cases, put paper or other materials around, protection to ensure that the product is not damaged.
This article gives a brief introduction to the production and processing of curved aluminum square tube. The purpose is to help increase the understanding of curved aluminum square tube. Because the processing procedure of curved aluminum square is more complex, usually aluminum square manufacturers will need a longer production cycle, customers need to arrange the purchase time when buying, to ensure the later construction progress.